Quantum Scalar 218 Especificações descarregar pdf (Página 62)

52 Operation and Maintenance

Note

To initiate the cleaning cycle manually you must be aware of the

present state of the Scalar Library and the drive that you wish to clean.

If a cartridge is present in the drive, you must first press the UNLOAD

button on the drive front panel, then, when the OPERATE HANDLE

LED is illuminated, open the drive door and remove the cartridge. You

can then proceed with these instructions.

If the drive is empty, but the door is closed, make sure that the

OPERATE HANDLE LED is illuminated before opening the door.

You may then proceed with these instructions.

If the drive is empty, and the door is open, proceed with these

instructions.

p Place the Scalar 218 in OFF-LINE Mode by pressing the MENU key.

p Using the Open Drive Door function of the Diagnostics Menu, open the door to the

drive that you wish to clean.

p Open the sliding access panel of the Scalar Library.

Note

You can manually move the Media Picker assembly right or left to

provide access to the drives. Push on the Media Picker at the bottom

only, pushing at the top will cause the bearings to bind and the Picker

will resist moving.

p Insert the cleaning cartridge into the drive you wish to clean.

p Using the Close Drive Door function of the Diagnostics Menu, close the drive door

handle.

The cleaning cycle will be performed. When cleaning is completed, the drive will eject the

cleaning cartridge. Remove the cleaning cartridge and check a usage box on the label.

p To resume normal operation, place the Scalar 218 back in ON-LINE Mode by pressing

the MENU key.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 108 109

Sem comentários

Quantum Scalar 218 Especificações Página 62