Quantum SDLT 320 Guia do Utilizador descarregar pdf (Página 53)

SDLT 220 and SDLT 320 Design & Integration Guide CHAPTER 4: Thermal Specifications

81-81148-01 March 2004 4-3

4.3 Thermal Measurement Locations

The Electronics Interface Module (EIM) comprises two boards: the Integrated

Controller Module (ICM) board, and the Host Interface Module (HIM) board.

Temperatures are measured on the ICM board in the locations shown in Figure 4-2,

on the HIM board on the Qlogic chip shown in Figure 4-3, and on the drive’s front

bezel in the locations shown in Figure 4-4.

NOTE: While the most critical temperatures are usually found

along the tape path, data for other key areas inside the

drive, such as the processor and other important circuits

and chips that are known to produce heat, are included as

well.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 101 102

Sem comentários

Quantum SDLT 320 Guia do Utilizador Página 53