Quantum Scalar i40 Guia do Utilizador descarregar pdf (Página 145)

Chapter 5: Performing Library Operations

Performing Media Operations

Quantum Scalar i40 and Scalar i80 User’s Guide 119

Caution: Some host applications may fail import/export operations

when the I/E station contains cartridges that are assigned

to another partition. Move cartridges from the I/E station

as soon as possible to avoid possible conflicts with the

other partitions.

The process for importing cartridges includes the following steps:

Inserting and Assigning Cartridges

1 Verify that all tape drives are unloaded and that all cartridges are in

their appropriate storage slot locations. Doing this will avoid over-

loading the library with cartridges.

2 Go to the front of the library and insert cartridges into the I/E

station.

3 Close the I/E station.

The I/E Assign screen appears on the operator panel if Manual

Cartridge Assignment is enabled on the operator panel (Setup >

System Settings).

4 If the I/E Assign screen appears, do the following:

a Using the operator panel, select the partition to which you want

to assign the cartridges. All unassigned cartridges in the I/E

station will be assigned to the same partition.

b Press Apply. (Alternatively, you may press Cancel to bypass this

step if you wish to assign cartridges to different partitions using

the Web client. Note that you must disable manual cartridge

assignment from the operator panel before you can import

unassigned cartridges, as described in the Note above.)

5 Continue using one of these options:

• Importing Cartridges via the Operator Panel on page 119

• Importing Cartridges via Web Client on page 120

Importing Cartridges via the Operator Panel

You can only import one cartridge at a time using the operator panel.

1 Select Actions > Import Tape.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 327 328

Sem comentários

Quantum Scalar i40 Guia do Utilizador Página 145