Quantum PX720 Manual de Instalação descarregar pdf (Página 29)

Quantum PX720 Unpacking and Installation Instructions

Document 6444602-04 A01

March 2005

Installing the Quantum PX720 Library 29

4 The SCSI, Ethernet, and Fibre Channel cables must be routed and stacked

in the right-hand clamps correctly so the back door will close. Route the

cables down through the cable channel on the right-hand side of the

library. Refer to figure 29

and figure 30 for cable diagrams illustrating the

correct cable placement.

Table 2 Cabling a FC470

Bridge to the Tape Drives

Caution: Use care when handling the fibre optic cables. Do not

crimp or bend the cables.

Tape Drive Connection FC470 Connections/ Tape Drive

Termination

Tape drive 0, upper port Port 0 on first FC470

Tape drive 0, lower port Library SCSI HBA

Tape drive 1, upper port Port 1 on first FC470

Tape drive 1, lower port Terminator

Tape drive 2, upper port Port 2 on first FC470

Tape drive 2, lower port Terminator

Tape drive 3, upper port Port 3 on first FC470

Tape drive 3, lower port Terminator

Tape drive 4, upper port Port 0 on second FC470

Tape drive 4, lower port Terminator

Tape drive 5, upper port Port 1 on second FC470

Tape drive 5, lower port Terminator

Tape drive 6, upper port Port 2 on second FC470

Tape drive 6, lower port Terminator

Tape drive 7, upper port Port 3 on second FC470

Tape drive 7, lower port Terminator

Tape drive 8, upper port Port 0 on third FC470

Tape drive 8, lower port Terminator

Tape drive 9, upper port Port 1 on third FC470

Tape drive 9, lower port Terminator

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 37 38

Sem comentários

Quantum PX720 Manual de Instalação Página 29