
Chapter 2 Basic Library Operations
Preparing the Library for Operation
Quantum|ATL P3000 Series User’s Guide 21
Closing the
Library Doors and
Access Panels
2
The library has two front doors and three back access panels.
1
Close and lock the front doors.
a
Close one door and then the other.
b
Turn the door latches to secure the doors to the library
frame.
c
Lower the latches over the door locks.
d
Using the key from the accessory kit, lock the latches in
place.
2
Close and lock the back access panels using a 5/32 hex wrench
(not provided).
Connecting Host
Workstations
2
Connect the SCSI cables and jumpers as shown in the applicable
figures.
Figure 11
shows the recommended cabling configurations for the
16-drive library.
Note:
Quantum|ATL ships sufficient SCSI cables and
terminators with this library to set up two-drives per
SCSI bus, as well as adequate SCSI jumper cables to
accommodate up to 4 drives per SCSI bus.
Comentários a estes Manuais