
Chapter 2 Basic Operations
Removing the Magazines
ATL M-Series User’s Guide 39
2 Press the button corresponding to the magazine access door you
want to open:
• To release the top left magazine access door, press
1.
• To release both left magazine access doors, press
1&2.
• To release the right magazine access door, press
3.
• To release all the magazine access doors, press
All.
3 Press the button next to the desired magazine access door and open
the door.
4 Grasp the handle at the front of the desired magazine and pull it
forward and out of the library.
5 When you are finished adding or removing cartridges from the
magazine, replace it in the library and close the magazine access
door.
6 On the
Release Magazines screen, press Re-Lock.
The library locks the magazine access doors and inventories the
magazines. When the inventory is complete, the GUI displays the
main screen.
Removing a Magazine When the ATL M2500 Library Is
Powered Down
2
To remove a magazine when the library is powered down:
1 Look through the viewing window and verify that all cartridges are
fully seated either in a magazine slot or in the robotic hand.
Note: If you are opening the bottom left magazine access door,
open the top left magazine access door first.
Caution: You can damage the library severely if you try to
remove a magazine when one of the data cartridges is
not fully seated.
Comentários a estes Manuais