Quantum ATL StackLink Guia do Utilizador Página 55

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 222
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 54
Chapter 2 Basic Operations
Using the Mailbox
ATL M-Series User’s Guide 37
Configuring the
Mailbox
2
By default, the
Import/Export option is set to MAP. To change this
setting:
1 On the main screen, press Mailbox.
The GUI displays the
Mailbox screen (see figure 22).
2 On the Mailbox screen, press Config.
The GUI displays the
Configuration screen, with the Import/
Export
option highlighted.
3 Use the Up and Down buttons to select the desired Import/
Export
setting. The available settings are None, 1-Slot,
10-Slot (or 12-Slot in LTO libraries), and MAP.
4 Press Select.
5 Press Main to return to the main screen.
Note: The default setting is MAP. For more information
about these settings, see Changing the Import/
Export Setting on page 69.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note: You must reboot the library before this setting will
take effect.
Vista de página 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 221 222

Comentários a estes Manuais

Sem comentários