
Chapter 3 Media Changer Commands
Read Element Status Command (B8h)
Quantum ATL SuperLoader Software Interface Guide 135
Table 57 Storage
Element Descriptor
Import/Export
Element
Descriptor
3
Figure 69
defines the import/export element descriptor.
•••
(1 byte)
Reserved Code Set
(1 byte)
Reserved Identifier Type
(1 byte)
Reserved
(1 byte)
Identifier Length
Field Name Description
Access Indicates that access to the element by a medium
transport element is allowed. An Access bit of zero
indicates that access to the element by the medium
transport element is denied. When a magazine is
removed from the SuperLoader, the corresponding
storage elements shall have an Access bit of 0. Access
will also be denied if the storage element is
configured as the location of a cleaning tape when
auto clean is enabled. When the Except bit is one, the
value of the Access bit is not valid.
Source
Storage
Element
Address
Provides the address of the last storage element this
unit of media occupied. This element address value
may or may not be the same as this element. This
field is valid only if the SVALID bit is one.
NOTE: For fields not defined in this table, see table 56
on page 133.
Bit
Byte7 654 3210
Comentários a estes Manuais