Quantum DPA Guia do Utilizador descarregar pdf (Página 75)

Performing System Operations Updating the CP 3100 Firmware

Updating the CP 3100 Firmware

The Firmware Update page lets you upload and install new firmware for the CP 3100. Figure 38 on

page 77 shows an example of the Firmware page.

The following procedure describes how to update the firmware.

1. Locate a new version of the CP 3100 firmware from the Certance technical support Web site:

www.certance.com/support

2. Download the file to a local computer.

3. Click SYSTEM TOOLS, then click FIRMWARE UPDATE.

4. In the Firmware Update page, enter the name of the name of the file containing the updated

firmware. Alternatively, you can click the Browse button to find and select the firmware file.

5. Click the Update Firmware button. The firmware file is uploaded to the CP 3100 and

checked for errors. If there are no errors, the firmware is unpacked from the file and loaded

into the CP 3100 Flash memory. The CP 3100 reboots to use the new firmware. During the

reboot process the CP 3100 will not be accessible from RemoteAdmin. When it is available,

you will have to login again to access the RemoteAdmin pages.

Host Name The CP 3100 host name. For information on specifying the host name,

see “Configuring Network Settings” on page 48.

Firmware Version The CP 3100 firmware version number.

NOTE: All operations to the Virtual Drive, Virtual Loader, and Physical Drive must be stopped

before updating the firmware.

Table 14. System Info Page (Continued)

Value Description

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 100 101

Sem comentários

Quantum DPA Guia do Utilizador Página 75